6CPC Pay & Arrears Calc 3.0 Final

(Applicable for All Central Government Employees other than those of Military Service)
<<Download Link >>
It is based on Gazette Notification dt 29 Aug 08 issued by Finance Ministry, Government of India.
It gives following information :-
  • Glance of new gross pay for any given month during last three years.
  • Glance of old gross pay for any given month during last three years.
  • Details of Fixation.
  • Due Drawn Statement with arrears upto any given month during last three years.

Individual who got promotion or old ACP in between last three years also have option to add in it. Modified ACP due has been added (As per notification, Old ACP received & Modified ACP due will be at different year). New appointee after Jan 2006 also have option check their salary.

Update : 21 Nov 08

  • Minor Fixes.

Update : 29 Sep 08

  • Tpt Allce for pay 7440 and above corrected.
  • Limit & Fixation corrected for HAG+, Apex and Sec scales.
  • Option of bunching if applicable added.
  • Error in fixation of old Scale to PB-4 corrected.
  • On Promotion & ACP minimum 6 month service not required to get increment corrected.
  • Option to uncheck Tpt Allce, if not required.
  • Option to add Name.
  • Trial usage extended to 05
  • Indls of PB-4 also can use this calculator.
  • Grade Pay for various scales PB-3 & PB-4 changed (As per Gazette Notification).
  • Minimum pay in all the pay band changed (As per Gazette Notification).
  • New appointee initial pay added.
  • Increment rounded off to the next multiple of 10.
  • On Promotion, ACP, New Appt, minimum 6 month service required to get increment.
  • Modified ACP required and/or ACP recd can be selected during different parts of last 3 years.
  • Factor Rate of Fixation changed from 1.74 to 1.86.
  • Rate of Increment changed from 2.5 % to 3 %.
  • Option to manually add new pay and grade pay for specific post as per Gazette Notification.
  • Rate of Tpt Allce changed.

This is a fully functional trial version that will expire after 3 uses or 1 day from first use.

<<Download Link >>

Note:
This Software is 100% accurate for many but may not be accurate for some for various reasons like for special category in scale, rank pay, grade pay, promotion, acp etc. Thus it may be used for education and reference purpose only.

27 comments:

Debasis Dhar said...
This comment has been removed by the author.
Unknown said...

I am unable to download from the rapidshare website. It is giving error message always. Can you pl send it to my email address sptgnadar@yahoo.com? I appreciate your help. Thanks in advance. Ganesh

Debasis said...

thamar,

do not use any download manager. Exit from it and download manually

AP9THPAYCOMMISSION said...

Excellent Calculator. But, the Box having the Heading "Revised Gross Pay for" in the Calculator is showing the Old Transpot Allowance and HRA amounts. Except this, remaining calculations in the calculator are ok. Please amend the above error and upoad the calculator again. From : k. kishore, hyderabad

Aravind said...

A Very useful and trustworthy calculator. You have done a great job. Thanks.

Debasis said...

katakam,

New Tpt Allowance is applicable from 01 Sep 08. So, check "Revised Gross Pay for" after Sep 08.

sihamavi said...

Thank you very much. Is it in line with gazette publiciation of 29-08-08. Kindly confirm

manojokha said...

very nice effort. please create a specific calculator for nurses, a humble request to you.

Jain said...

thank for this very useful calculator. pl update it as per notification. as in the notification the basic will round in the next ten.
once again thanks for this useful tool.

shekhar said...

Hi debasis
Gr8 work but after the notification there are following errors in your calculator.
1. Grade pay changed
2. There is option for fixation of pay if there is promotion between 1.1.06 and 1.9.08. In case pay fixed after promotion (say april 06) then before that the arrear is 0. pl modify

shekhar

Unknown said...

You have done a great job. Thanks. Manish, Nagpur

Unknown said...

You have done a great job. Thanks. Manish Upadhye, Nagpur

Unknown said...

Basic should be rounded to nearest Rs. 10 as per notfn. rest is fine. Manish Upadhye, Nagpur

Unknown said...

The new calculator is too good. But pls put an option for transport allowance. If possible pls make provide with an automated form as per Anenxure II of OM dated 30/08/2008. It will be a gr8 help.

shekhar said...

hi
The new calculator (d version) still has not changed grade pay.

The option of fixation of pay after 1.1.06 due to promotion still not addressed.

For correct to 10 use the formula CEILING(CELL NO., 10)

WITH REGARDS
SHEKHAR

Unknown said...

debasis you have done an excellent work by making this software. keep it up in the interest of all govt. servants
R R Shukla

anant said...

Dear Debasis,
I am unable to download through rapidshare. Please e-mail it at anant.swarup@nic.in

anant said...

Dear Debasis,
How do I download manually? Thank you.

Debasis said...

It is now new calculator based on all amendments

Krishna said...

Dear Debasis,
It is a great work and you should deserve all the praise for your hard work.It is the best calculator that is available in the net. But the protection you have introduced is very weak anybody with little bit computer knowledge can overcome in few minutes. thank a lot for the excellent piece of software.

KUNDAN said...

dear debasis
I have installed your calculator but could not open.i could not able to enable MACRO as advised.
KUNDAN.PATNA
kundan2957@gmail.com

anant said...

Dear Debais,
Congratulations on the excellent work done. It is the best calculator available on the net. Your effort is brilliant.

I have a suggestion to make that the format may kindly be changed to the one prescribed by the Pay Commission. Moreover, the benefit of bunching is not being calculated in PB-4 and above.

Regards,

Anant

KUNDAN said...

I would like to point out the following anomalies about Annual Increment:

(i)The Hindi Version of the Resolution dated 29.8.2008 states (page no. 16; Paragraph VII (iii) that the Government has accepted CPC recommendation with the modification that there would be two dates of increment, viz., 1st January and 1st July of each year.

However, the English version of the Resolution (page no. 43; Paragraph VII (iii)says that the Government has accepted CPC recommendation of granting Annual Increment, in all cases, on 1st July in respect of employees completing six months and above in the scale as on 1st July.

Which is the correct position, the Hindi version or the English version?

(ii) The Notification dated 29.8.2008 for the CCS(RP) Rules, 2008 (English version) states (page 39; Paragraph 10) as under:
"There will be a uniform date of annual increment, viz., 1st July of every year. Employees completing 6 months and above in the revised pay structure as on 1st of July will be eligible to be granted the increment. The first increment after fixation of pay on 01.01.2006 in the revised pay structure will be granted on 01.07.2006 for those employees for whom the date of next increment was between 1st July, 2006 to 1st January, 2007.
Whereas in Hindi version it is as under –
The first increment after fixation of pay on 01.01.2006 in the revised pay structure will be granted on 1.7.2006 for those employees for whom the date of next increment was between 1st July, 2006 to 31st December, 2006.
Please note the date, it is at one place as 31.12.2006 and at other place it is 01.01.2007
The Rule is silent about those employees whose date of increment was between February, 2006 to June, 2006. Why this discrimination against the employees who had their dates of increment between February 2006 and June 2006?

(iii) The OM dated 30.8.2008, which prescribes the mode of implementation of the CCS(RP) Rules state [paragraph 2 (iii)]the following, confuses the matter even further:

".....Consequently, in the case of employees whose date of next increment falls on 1.1.2006, the increment will be drawn in the pre-revised scale and pay fixed in accordance with the tables after including this increment. The next increment in the revised pay structure in such cases will be drawn on 1st July, 2006."

Thus, this OM omits the cases of all employees but of those whose date of increment was on 1.1.2006.

The above anomalies need to be looked into. While increments of the employees whose dates of increment were between July to December 2006 are being advanced,the cases of employees with the date of increment on 01.01.2006 are being taken care of, the employees with the dates of increment between February and June, 2006 will get their increment on 01.07.7007 i.e. after at least one year one month and one year five month and have simply been ignored and being discriminated for no valid reason

Krishna said...

There is a small anomaly in the calculation. Whenever increment is a fraction, it may rounded off to nearest 10 rupees on the higher side. Your calculator does not round off to nearest 10 rupees, if the fraction is like Rs610.20. this should have been rounded off to Rs.620. your calculator is still showing Rs.610 only. Please correct it , if I am correct.

rambal said...

Very nice

rambal said...

will this calculator woll be applicable to the state Govt. employees

Samir Bose said...

Nice software, being a university teacher and due to AGP these are not applicable to us, if you could develop this software for us also.

Details are given below:-


http://www.ugc.ac.in/notices/scpadminiteacher.html
(For Academics)

http://hubpages.com/hub/UGC-Pay-Panel-Report---6th-Pay-Commission-Injustice-done-to-Associate-Professors